PAC analytical instruments use multiple technologies including spectroscopy to detect properties including thermal stability and viscosity, advancing the delivery of gasoline, cosmetics, plastics, and other petrochemical products.
The benchmark in atmospheric distillation
Fast and reliable response distillation analysis
Pour and cloud point testing of any petroleum products, down to -95°C (-139°F)
Compact, portable analyzer delivers fast results (30°C in less than 30 minutes, and quick pour point correlation with no flow).
Determine flash point of petroleum products with the Pensky Martens method
Flash point analysis using the Tag and Abel methods
Accurate Flash Point Determination for Low Volume Samples
Precise derived cetane number determination in diesel fuel oils
Temperature controlled viscometer for oil viscosity measurements in laboratories
Laboratory viscometer for accurate, reliable, repeatable viscosity readings
Determines direct kinematic viscosity of transparent and opaque liquids fully automated
Manual Viscometer Bath for accurate temperature controls required for general laboratory use or as a constant temperature bath
Automated Ring & Ball Tester for precise and easy softening point determination
Determine the softening point of bitumen, tar, pitch, tall oil rosins, and polymeric resins
Determine evaporation loss of lubricating oils, an issue of particular importance in engine lubrication
Accurate determination of vapor pressure of both automotive and aviation gasoline, turbine fuels, other light distillate petroleum products, hydrocarbon solvents and chemical compounds.
Manual visual tube rater
Antek's MultiTek is the leading instrument on the market that combines testing for Sulfur, Nitrogen, and Halides all in one
AC's Fast Refinery Gas Analyzer by PAC Separates Inert Gases and C1-C5 Hydocarbons in 20 Minutes. AC Analytical Controls by PAC developed the Fast Refinery Gas Analyzer (RGA), a fast solution that determines the composition of refinery gases within twenty minutes.
PAC's AC Analytical Controls offers the Hi-Speed Refinery Gas Analyzer, a high speed solution that determines and reports the composition of refinery gas streams in only five minutes.
Full range of DHA solutions for applications to comply with ASTM D 5134,D 6729, D 6730 and D 6733
AC Analytical Controls®, the global SIMDIS market leader, provides a full range of solutions that accurately determine true boiling point data from naphtha up to crude oil samples.
The AC Analytical Controls® CNS SIMDIS for Crude Oil is the most advanced analyzer on the market to simultaneously determine the boiling range distribution of Carbon, Nitrogen, and Sulfur in crudes and final products.
AC Analytical Controls® offers the Extended Hydrocarbon Oil Index analyzer to determine the content of dispersed mineral oil between n-C7 and n-C40 in water by means of gas chromatography.
The AC Analytical Controls® AC8612 application delivers ASTM D86 correlated data for naphtha and gasoline samples within ASTM D86 groups 0, 1, and 2 in 15 minutes. It is based on fast detailed hydrocarbon analysis (DHA), and uses the PAC proprietary Fugacity Film Calculation Model for reporting accurate D86 correlated data.
To assist refiners in determining D86 boiling range data AC Analytical Controls developed the AC 8634 application. Gas chromatography and thermodynamics are the basis of the 8634 analyzer.
Hydrocarbon Group Type Analysis
AC Analytical Controls by PAC offers a solution to characterize the composition of natural gases according to GPA 2261 with results within 25 minutes.
Analysis of sulfur compounds in light petroleum liquids by Gas Chromatography and Sulfur Selective Detection according to ASTM D5623, and analysis of ultra low sulfur compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and chemiluminescence according to ASTM D5504
AC Analytical Controls developed a series of Oxytracer Solutions to determines trace impurities of oxygenates in light petroleum streams such as C2 and C3 gases, LPG, Naphtha and Gasolines, in accordance with different methods.
The AC UOP 603-13 Gas Analyzer is a specialized solution for determination of trace CO and CO2 in hydrogen and light gaseous hydrocarbons analysis according to UOP 603-13. The method was developed by UOP based on an AC Analytical Controls design.
The FTO system analyzes streams with concentrations of 0.2%-35% olefins. This GC system determines C4 - C10 olefins in all finished motor gasolines, straight naphthas and FCC naphthas.
The AC Analytical Controls Thiophene in Benzene application meets ASTM D7011 standards by determining trace thiophene in refined benzene by gas chromatography and sulfur selective detection.
The SeNse is the latest development by AC Analytical Controls. The Sulphur Chemiluminescence Detector (SCD) provides the best sensitivity, best baseline stability and best equimolarity results, and as such it will flexibly fit with most chromatographic solutions.
Determine flash points with the Cleveland Open Cup method
Budget-friendly manual flash point analyzers
Phase Technology’s 70Xi analyzes pour, cloud and freeze point, all in one unit
Measure freeze point, viscosity and density in jet fuel with Phases's JFA-70Xi in less than 15 minutes
Freeze point analyzer combines a patented built-in cooling system and a unique, patented detection cell into an ultra-compact design.
Density meter for heavy oils and also pharmaceutical and food & beverage applications
Measure density of light and mid distillates (40) and heavy oils (40H)
Automatically determine kinematic viscosity of lubricating oils, used oils, fuels, polymers
Small, portable package that makes it the most affordable cloud point analyzer for diesel and biodiesel fuels
Gum Test Apparatus to measure evaporation residue in aviation fuels, motor gasolines, and other volatile distillates.
Intelligent Heater Tube for JFTOT and OptiReader
PAC ElemeNtS is the most advanced, modular, analytical system combining the detection of Total Sulfur and/or Total Nitrogen in today’s market.
©2018 PAC L.P. All rights reserved.