Determine the temperature at which a particular organic compound gives off sufficient vapor to ignite in air. Measuring a flash point requires an ignition source. At the flash point, the vapor may cease to burn when the ignition source is removed.

Cetane Ignition Delay

Precise derived cetane number determination in diesel fuel oils

OptiFlash Pensky Matens

Determine flash point of petroleum products with the Pensky Martens method

OptiFlash Tag & Abel

Flash point analysis using the Tag and Abel methods

OptiFlash Small Scale

Accurate Flash Point Determination for Low Volume Samples

Optiflash Cleveland Open Cup

 Determine flash points with the Cleveland Open Cup method

Micro Carbon Residue Tester

Micro Carbon Residue Tester


Determine evaporation loss of lubricating oils, an issue of particular importance in engine lubrication

Ring and ball

Automated Ring & Ball Tester for precise and easy softening point determination

HRB 754

Determine the softening point of bitumen, tar, pitch, tall oil rosins, and polymeric resins

automated vapor pressure

Accurate determination of vapor pressure of both automotive and aviation gasoline, turbine fuels, other light distillate petroleum products, hydrocarbon solvents and chemical compounds.

Manual flash point analyzers

Budget-friendly manual flash point analyzers

HGT 915 917

Gum Test Apparatus to measure  evaporation  residue  in  aviation  fuels,  motor  gasolines,  and  other  volatile  distillates.

scroll up