PAC analyzers are designed to measure physical properties in diesel fuel and blending streams with minimal operator intervention. The most common diesel analysis include tests for water contamination, ash content, cetane number, cloud point, cold filter plugging point, pour point, lubricity, and particulate contamination. Our diesel analyzers comply with standards: ASTM D975, ASTM D396, ASTM D7467, ASTM D2880, EU 590 and their methods and specifications.
Diesel Solutions Brochure
Modified JFTOT for Diesel Fuel Application
Precision and portability in a top of the line FTIR Fuel Analyzer
PAC ElemeNtS is the most advanced, modular, analytical system combining the detection of Total Sulfur and/or Total Nitrogen in today’s market.
Four diesel fuel tests in one single unit, in less than 25 minutes
Fast and reliable response distillation analysis
Precise derived cetane number determination in diesel fuel oils
Compact, portable analyzer delivers fast results (30°C in less than 30 minutes, and quick pour point correlation with no flow).
Pour and cloud point testing of any petroleum products, down to -95°C (-139°F)
The benchmark in atmospheric distillation
Determine flash point of petroleum products with the Pensky Martens method
Accurate Flash Point Determination for Low Volume Samples
ASTM D4530 Carbon Residue Testing
Intelligent Heater Tube for JFTOT and OptiReader
481 & 482 Automated Ubbelohde Viscometers
Determines direct kinematic viscosity of transparent and opaque liquids fully automated
Small, portable package that makes it the most affordable cloud point analyzer for diesel and biodiesel fuels
AC Analytical Controls®, the global SIMDIS market leader, provides a full range of solutions that accurately determine true boiling point data from naphtha up to crude oil samples.
To assist refiners in determining D86 boiling range data AC Analytical Controls developed the AC 8634 application. Gas chromatography and thermodynamics are the basis of the 8634 analyzer.
ACs Flow Modulation based solutions provides group-type analysis that is rugged, requires very low maintenance, and performs excellent.
Solves the toughest analytical challenges through a GC that is designed, built, and tested for your specific application, to perform exactly as desired for the particular sample stream
The SeNse is the latest development by AC Analytical Controls. The Sulphur Chemiluminescence Detector (SCD) provides the best sensitivity, best baseline stability and best equimolarity results, and as such it will flexibly fit with most chromatographic solutions.
Measure density of light and mid distillates (40) and heavy oils (40H)
Specifically designed for mobile laboratory applications
Quantify dye and color concentrations in diesel fuels and heating oils
To assist refiners in determining the aromatic content of diesel fuels, AC Analytical Controls developed a fast, robust and easy-to-use system: The AC Mid Distillates Analyzer (MDA).
Manual Viscometer Bath for accurate temperature controls required for general laboratory use or as a constant temperature bath
Phase Technology’s 70Xi analyzes pour, cloud and freeze point, all in one unit
©2019 PAC L.P. All rights reserved.