Contact Us
My Cart
Login / Register

PAC Corporate Headquarters

8824 Fallbrook Drive
Houston, TX 77064 USA
Phone: 800.444.TEST
Fax: 281.580.0719

Browse by:
FZP 5G2s - Freeze Point
FZP 5G2s - Freeze Point

FZP 5G2s - Freeze Point

FZP 5G2s - Freeze Point

Freezing Point

Test Methods
ASTM D2386, ASTM D7153, IP 16, IP 529, ISO 3013, JIS K2276

Long duration flight at high altitude subjects aircraft fuel tanks to very low temperatures, presenting a threat of fuel line and filter blockage due to hydrocarbon crystal formation. Heavy hydrocarbons and/or wax-containing products can change a fuels cold behavior properties, creating significant flight safety risk. Therefore, rigorous control of aviation fuels freeze point is important at all stages between production and aircraft fueling, including intermediate reloading points within the distribution system. ISLs FZP 5G2s provides highly accurate freezing point determinations down to -100C (-148F), helping you assure the low-temperature flow performance of your aviation fuel. It combines a patented built-in cooling system and a unique, patented detection cell into an ultra-compact, easy to use instrument that is ready to work whenever and wherever you are. Simply inject approximately 10 ml of sample and press Test; no pre-test programming is necessary. The unit automatically controls test progress and deliver precise results in less than 15 minutes. Self-cleaning operation speeds and simplifies testing, while smart software features assure accurate testing of difficult and contaminated samples.


Freeze Point, Freeze Point

Features & Benefits

  • Full determination of all olefins within 20 minutes
  • Applicable for all finished motor gasoline and naphtha streams
  • Application range: 0.2-35.0% olefinic streams
  • Excellent repeatability
  • Detects all types of crystallization in all types of jet fuels
  • Highly reliable operation; not affected by ambient moisture
  • Perfect repeatability and reproducibility on neat samples
  • Perfect correlation with CRM, cross check and manual results
  • Built in cooling system cools sample to -120C without any external connection
  • Small footprint