NSure: Nitrogen & Sulfur

NSure Sulfur: UV- Fluorescence (UVF) Spectrometry
NSure Nitrogen: Chemiluminescence detection (CLD)

NSure Sulfur: ASTM D5453, ASTM D6667, ASTM D7183, ISO 20846（SH/T0689,GB/T 11060.8 in China）
NSure Nitrogen: ASTM D4629, ASTM D5176, ASTM D5762, ASTM D7184, DIN 38409

CSA/UL, NEC Class 1 Division 2 Groups A, B, C and D
ATEX:

• Zone 1 Ex db ib pxb IIC T4 Gb (T3 w/heated valve)
• Zone 2 Ex db nA pxb IIC T4 Gb (T3 w/heated valve)

Sulfur:

• Full-scale ranges from 0-1 ppm/wt to 0–5% level (field adjustable)

Nitrogen:

• Full-scale ranges from 0-1 ppm/wt to 0–2000 ppm/wt level (field adjustable)
• Note: Higher ranges available, consult factory. Dual ranges with DCS remote selectable
  or automatic range switching.

Single or Dual stream options

100 ppb

ppm (mg/m3 is optional, users need to provide relevant parameters as required)

Within <0.5% of full scale, for most applications

1 minute per stream

1-5 minutes per stream (application dependent)

Less than 1% of full scale

1% of full scale per week

Automatic or manual system validation and calibration with user-defined parameters

1 minute per stream (application dependent)

4-20mA (active) isolated outputs, range selectable
Discrete digital inputs and outputs for remote control and status indicationRS-485 for Modbus RTU (standard)
Modbus TCP/IP and Ethernet (standard)
Remote workstation (optional)

Yes

Carrier Gas: Argon, instrument air* or nitrogen (99.975%) regulated to 50 psig (3.4 Bar) at 1-15 cc/min (typical; application dependent)

Combustion Gas: Instrument air* or oxygen O2 (99.975%) regulated to 50 psig (3.4 Bar) at 350-500 cc/min (typical; application dependent)

Valve and Pneumatic Air Supply: Clean, dry, particle-free air @ 80-100 psig (5.5 – 6.9 Bar)

Purge Air Supply: Clean, dry, particle-free air at 80-120 psig (5.5 – 6.9 Bar); 425 LPM (15 SCFM) for startup and then 130 LPM (4.6 SCFM) for normal operation

*Instrument air: Clean, dry, particle-free

Note: NSure Sulfur can be operated on 100% instrument air for most applications

Sample Phase: Gas or Liquid

Sample Inlet Pressure: Up to 400 psig (27.6 Bar) (application dependent)

Sample Inlet Temperature: Up to 212˚F (100˚C)

Sample Condition: Sample should be filtered to at least 0.5 microns

Sample Return Pressure: <10-20 psi input (0.7 – 1.4 Bar); maintain ≥25 psi (1.7 Bar) differential to return to process

115 VAC (13 Amps) or 230 VAC (6.5 Amps); 50-60 Hz

1500 Watts

LCD: PLC with 7” (17.8 cm) touchscreen display or 15” (38.1 cm) touchscreen display
The touchscreen is used to program the unit and display current and historical analyser results and alarm status

32-105˚F (0-40˚C), extreme conditions may require vortec cooler option

Enclosures: Width – 26 in (66 cm), Depth – 17 in (43.2 cm), Height – 45 in (114.3 cm)
Floor to analyzer (minimum): 18 in (23 cm); Add 5 inches to height for Bebco Vent
Unobstructed-Mounted Enclosure: Width – 26 in (66.04 cm); Depth – 30 in (76.2 cm), Height – 72 in (182.9 cm)

400 pounds (181.4 Kg)

86 in (218.4 cm) x 42 in (106.7 cm) x 56 in (142.2 cm); 775 lbs. (351.5 Kg)