PROCESS ON-LINE PETROLEUM TESTING
GENERAL FLASH POINT MONITOR

 
Shown: 45650
General Flash Point Monitor

Measure the flash point of high viscosity products quickly, conveniently,
and completely on-line!

The PSPI General Flash Point Monitor is a continuous, on-stream process monitor for measuring the flash point of high viscosity hydrocarbons

	Accepts samples with viscosities as high as 2000 cSt (9300SSU) at 38ºC (100ºF) and flash point temperatures from 60º to 315ºC (140ºF to 600ºF)
	Repeatability of ±1.5ºC (±3ºF)
	Monitor returns sample directly to process stream 7.0 kg/cm2 (100 psig) maximum
	Measurements correlate to ASTM D 93 Pensky-Martens Closed Cup or ASTM D 92 Cleveland Open Cup test procedures

	Typical Applications:
	Monitor heat exchangers in crude units to detect leakage and prevent crude contamination of bottoms Optimize yield on gas oils and heavy fuels Optimize yield on distillate side streams in vacuum distillation Control diluent addition to burner fuels Fuel oil blending Solvent recovery Furfural extraction

See also:
View product brochure. PDF format requires Acrobat Reader 4.0 or higher, which is available for free download at www.adobe.com.
Complete an Application Data Sheet. 
View full line of PAC flash point testing equipment.