TQACO2 - TOTAL QUALITY ASSURANCE FOR CO2

Meet specs using one analyzer package. ANTEK Industrial offers the only turn-key system for quality assurance of CO2. The TQACO2 is a complete analyzer package with a single operating data system. Gas suppliers and bulk CO2 users can now generate their own load report to show compliance with your specifications.

• Meet CO2 specifications using one analyzer package
• Sulfur, nitrogen, total hydrocarbon, aromatic hydrocarbons, moisture,
  dewpoint, oxygen
• PC control and data acquisition system
• NEMA 4, 19" rack mount, purged housings, and explosion proof housing

If you are associated with the sale or use of carbon dioxide in your business, then the levels of impurities should be important to you. No matter where you are in the distribution chain of carbon dioxide, the contaminants will ultimately effect your customer and their customers.

Contamination in your carbon dioxide can come from many sources. Possibly your supplier has produced product from multiple batches. Different suppliers can produce varied quality products, some of which contain sulfur and some that do not. The transporter may load from different batches or supplies and consequently contaminate your lines when unloading to you. Even if your supply has been constant for years, the chances are increasing that your supplier will ultimately provide you with a bad load, often through no fault of their own.

SAMPLE HANDLING
The sample preparation system is designed to extract a representative sample from delivery or receiving piping. The sample is pressure regulated and vaporized prior to introduction into the analyzers. Analysis is performed by continuous flow through the analyzers, with the exception of the Aromatic Hydrocarbon Analyzer (benzene analysis), which samples discretely via injection valve. Control of flow is regulated at each analyzer independently.

PC-CONTROL & DATA ACQUISITION
An optional sophisticated PC control and data acquisition system is offered for use with ANTEK's TQACO2 analyzers. The system software's easy to use graphical interface allows users to perform all operations by the click of a mouse. Seven channels are available for analog analyzer signals each scanned at 100 Hz, averaged to 10 Hz each, with calibration capability for each channel. Analog outputs are included to send an analyzer measurement signal to a strip chart recorder or SCADA.

SEE TQACO2 SPECIFICATIONS

See also:
View TQACO2 product literature PDF format requires Acrobat Reader 3.0 or higher, which is available for free download at www.adobe.com.